LORD Rubber Plateform Mount Series | Holder

Compression Load Range: 0.5 - 90 lbs (2 - 400 N)

"Versatile mounts...effective isolation against vibration...provides maximum service life..."

LORD Plateform Mounts Series Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide uniform stress distribution. This, plus high strength bonding and the use of specially compounded elastomers, provides maximum service life.

These versatile mounts are available in three types, square, diamond or holder configurations to suit a variety of design requirements. The Plateform Mount Series Mounts offer a range in load ratings from 0.5 to 90 pounds.

Features and Benefits

  • Load ratings from 0.5 to 90 pounds
  • Uniform stress distribution
  • Available with or without holders
  • Safetied (when used with washers)
  • Vibration and shock Noise control
  • Versatile
  • Low cost installation
  • Extended equipment life
  • Easy to service
LORD Rubber Plateform Mount Series | Holder
CATALOG
Application analysis forms
Lets Get Started!  

Quick Quote
Ask A Question
Engineering Support
  (800) 657-0747
  Address
  About Us       

Applications

  • Engine/ generator sets
  • Engines
  • Engine/pump sets
  • Air conditioners
  • Plant machinery
  • Electronics
  • Compressors
  • Motors
  • Business machines
  • Appliances

 

LORD Plateform Mounts are easy to install and provide space efficiency.

Snubbing washers provide an interlocking system of metal parts which act to prevent damage from overload or excessive shock impact.

Use the diagrams and the table below to find the right mount for your application.

Specs
Specs Metric
Dimensions
Dimensions Metric
reset matrix
clear
Part #
clear
Series No.
clear
Part Type
clear
Max. Axial Load (lb)
clear
Axial Spring Rates (lb/in.)
clear
Washer
100PHL-A 100 Aluminum Holder 0.5 lbs. 8 lb/in. J-2049-1
100PHL-1 100 Aluminum Holder 1.0 lbs. 16 lb/in. J-2049-1
100PHL-2 100 Aluminum Holder 2.0 lbs. 32 lb/in. J-2049-1
100PHL-3 100 Aluminum Holder 3.0 lbs. 48 lb/in. J-2049-1
100PHL-4 100 Aluminum Holder 4.0 lbs. 64 lb/in. J-2049-1
100PHL-6 100 Aluminum Holder 6.0 lbs. 96 lb/in. J-2049-1
100PHL-8 100 Aluminum Holder 8.0 lbs. 128 lb/in. J-2049-1
100PHL-10 100 Aluminum Holder 10.0 lbs. 160 lb/in. J-2049-1
100PHL-12 100 Aluminum Holder 12.0 lbs. 192 lb/in. J-2049-1
150PH-2 150 (Steel) Holder 2.0 lbs. 32 lb/in. J-2049-2
150PH-4 150 (Steel) Holder 4.0 lbs. 64 lb/in. J-2049-2
150PH-6 150 (Steel) Holder 6.0 lbs. 96 lb/in. J-2049-2
150PH-8 150 (Steel) Holder 8.0 lbs. 128 lb/in. J-2049-2
150PH-10 150 (Steel) Holder 10.0 lbs. 160 lb/in. J-2049-2
150PH-12 150 (Steel) Holder 12.0 lbs. 193 lb/in. J-2049-2
150PH-14 150 (Steel) Holder 14.0 lbs. 224 lb/in. J-2049-2
150PH-18 150 (Steel) Holder 18.0 lbs. 288 lb/in. J-2049-2
150PH-24 150 (Steel) Holder 24.0 lbs. 384 lb/in. J-2049-2
150PH-30 150 (Steel) Holder 30.0 lbs. 480 lb/in. J-2049-2
200PH-10 200 (Steel) Holder 10.0 lbs. 160 lb/in. J-2049-3
200PH-15 200 (Steel) Holder 15.0 lbs. 240 lb/in. J-2049-3
200PH-20 200 (Steel) Holder 20.0 lbs. 320 lb/in. J-2049-3
200PH-25 200 (Steel) Holder 25.0 lbs. 400 lb/in. J-2049-3
200PH-35 200 (Steel) Holder 35.0 lbs. 560 lb/in. J-2049-3
200PH-45 200 (Steel) Holder 45.0 lbs. 720 lb/in. J-2049-3
200XPH-60 200X (Steel) Holder 60.0 lbs. 960 lb/in. J-2049-3
200XPH-75 200X (Steel) Holder 75.0 lbs. 1200 lb/in. J-2049-3
200XPH-90 200X (Steel) Holder 90.0 lbs. 1440 lb/in. J-2049-3
reset matrix
clear
Part #
clear
Series No.
clear
Part Type
clear
Max. Axial Load (N)
clear
Axial Spring Rates (N/mm)
clear
Washer
100PHL-A 100 Aluminum Holder 2 N 1.4 N/mm J-2049-1
100PHL-1 100 Aluminum Holder 4 N 2.8 N/mm J-2049-1
100PHL-2 100 Aluminum Holder 9 N 5.6 N/mm J-2049-1
100PHL-3 100 Aluminum Holder 13 N 8.4 N/mm J-2049-1
100PHL-4 100 Aluminum Holder 18 N 11.2 N/mm J-2049-1
100PHL-6 100 Aluminum Holder 27 N 16.8 N/mm J-2049-1
100PHL-8 100 Aluminum Holder 36 N 2.4 N/mm J-2049-1
100PHL-10 100 Aluminum Holder 44 N 28.0 N/mm J-2049-1
100PHL-12 100 Aluminum Holder 53 N 33.6 N/mm J-2049-1
150PH-2 150 (Steel) Holder 9 N 5.6 N/mm J-2049-2
150PH-4 150 (Steel) Holder 18 N 11.2 N/mm J-2049-2
150PH-6 150 (Steel) Holder 27 N 16.8 N/mm J-2049-2
150PH-8 150 (Steel) Holder 36 N 22.4 N/mm J-2049-2
150PH-10 150 (Steel) Holder 44 N 28.0 N/mm J-2049-2
150PH-12 150 (Steel) Holder 53 N 33.6 N/mm J-2049-2
150PH-14 150 (Steel) Holder 62 N 39.2 N/mm J-2049-2
150PH-18 150 (Steel) Holder 80 N 50.4 N/mm J-2049-2
150PH-24 150 (Steel) Holder 107 N 67.2 N/mm J-2049-2
150PH-30 150 (Steel) Holder 133 N 84.1 N/mm J-2049-2
200PH-10 200 (Steel) Holder 44 N 28.0 N/mm J-2049-3
200PH-15 200 (Steel) Holder 67 N 42.0 N/mm J-2049-3
200PH-20 200 (Steel) Holder 89 N 56.0 N/mm J-2049-3
200PH-25 200 (Steel) Holder 111 N 70.1 N/mm J-2049-3
200PH-35 200 (Steel) Holder 156 N 98.1 N/mm J-2049-3
200PH-45 200 (Steel) Holder 200 N 126.1 N/mm J-2049-3
200XPH-60 200X (Steel) Holder 267 N 168.1 N/mm J-2049-3
200XPH-75 200X (Steel) Holder 33 N 210.2 N/mm J-2049-3
200XPH-90 200X (Steel) Holder 400 N 252.2 N/mm J-2049-3
reset matrix
clear
Part #
clear
A (in.)
clear
D (in.)
clear
I (in.)
clear
K (in)
clear
L (in.)
clear
M (in.)
clear
O (in.)
clear
P (in.)
clear
U (in.)
100PHL-A 1.00 in. 0.17 in. 0.41 in. 1.69 in. 1.38 in. 0.14 in. 0.78 in. 0.03 in. 0.15 in.
100PHL-1 1.00 in. 0.17 in. 0.41 in. 1.69 in. 1.38 in. 0.14 in. 0.78 in. 0.03 in. 0.15 in.
100PHL-2 1.00 in. 0.17 in. 0.41 in. 1.69 in. 1.38 in. 0.14 in. 0.78 in. 0.03 in. 0.15 in.
100PHL-3 1.00 in. 0.17 in. 0.41 in. 1.69 in. 1.38 in. 0.14 in. 0.78 in. 0.03 in. 0.15 in.
100PHL-4 1.00 in. 0.17 in. 0.41 in. 1.69 in. 1.38 in. 0.14 in. 0.78 in. 0.03 in. 0.15 in.
100PHL-6 1.00 in. 0.17 in. 0.41 in. 1.69 in. 1.38 in. 0.14 in. 0.78 in. 0.03 in. 0.15 in.
100PHL-8 1.00 in. 0.17 in. 0.50 in. 1.69 in. 1.38 in. 0.14 in. 0.81 in. 0.03 in. 0.15 in.
100PHL-10 1.00 in. 0.17 in. 0.62 in. 1.69 in. 1.38 in. 0.14 in. 0.88 in. 0.03 in. 0.15 in.
100PHL-12 1.00 in. 0.17 in. 0.75 in. 1.69 in. 1.38 in. 0.14 in. 0.94 in. 0.03 in. 0.15 in.
150PH-2 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 0.20 in. 1.12 in. 0.03 in. 0.18 in.
150PH-4 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 1.38 in. 1.12 in. 0.03 in. 0.18 in.
150PH-6 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 1.38 in. 1.12 in. 0.03 in. 0.18 in.
150PH-8 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 0.20 in. 1.12 in. 0.03 in. 0.18 in.
150PH-10 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 0.20 in. 1.12 in. 0.03 in. 0.18 in.
150PH-12 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 0.20 in. 1.12 in. 0.03 in. 0.18 in.
150PH-14 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 0.20 in. 1.12 in. 0.03 in. 0.18 in.
150PH-18 1.50 in. 0.26 in. 0.62 in. 2.38 in. 1.94 in. 0.20 in. 1.12 in. 0.03 in. 0.18 in.
150PH-24 1.50 in. 0.26 in. 0.88 in. 2.38 in. 1.94 in. 1.38 in. 1.28 in. 0.03 in. 0.18 in.
150PH-30 2.00 in. 0.39 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200PH-10 2.00 in. 0.39 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200PH-15 2.00 in. 0.39 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200PH-20 2.00 in. 0.39 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200PH-25 2.00 in. 0.39 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200PH-35 2.00 in. 0.39 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200PH-45 2.00 in. 0.04 in. 1.00 in. 3.00 in. 2.50 in. 0.26 in. 1.56 in. 0.03 in. 0.22 in.
200XPH-60 2.00 in. 0.39 in. 1.81 in. 3.00 in. 2.50 in. 0.26 in. 2.38 in. 0.03 in. 0.22 in.
200XPH-75 2.00 in. 0.39 in. 1.81 in. 3.00 in. 2.50 in. 0.26 in. 2.38 in. 0.03 in. 0.22 in.
200XPH-90 2.00 in. 0.39 in. 1.81 in. 3.00 in. 2.50 in. 0.26 in. 2.38 in. 0.03 in. 0.22 in.
reset matrix
clear
Part #
clear
A (mm)
clear
D (mm)
clear
I (mm)
clear
K (mm)
clear
L (mm)
clear
M (mm)
clear
O (mm)
clear
P (mm)
clear
U (mm)
100PHL-A 25.4 mm 4.2 mm 10.4 mm 42.9 mm 34.9 mm 34.9 mm 19.8 mm 0.6 mm 3.8 mm
100PHL-1 25.4 mm 4.2 mm 10.4 mm 42.9 mm 34.9 mm 34.9 mm 19.8 mm 0.6 mm 3.8 mm
100PHL-2 25.4 mm 4.2 mm 10.4 mm 42.9 mm 34.9 mm 34.9 mm 19.8 mm 0.6 mm 3.8 mm
100PHL-3 25.4 mm 4.2 mm 10.4 mm 42.9 mm 34.9 mm 34.9 mm 19.8 mm 0.6 mm 3.8 mm
100PHL-4 25.4 mm 4.2 mm 10.4 mm 42.9 mm 34.9 mm 34.9 mm 19.8 mm 0.6 mm 3.8 mm
100PHL-6 25.4 mm 4.2 mm 10.4 mm 42.9 mm 34.9 mm 34.9 mm 19.8 mm 0.6 mm 3.8 mm
100PHL-8 25.4 mm 4.2 mm 12.7 mm 42.9 mm 34.9 mm 34.9 mm 20.6 mm 0.6 mm 3.8 mm
100PHL-10 25.4 mm 4.2 mm 15.7 mm 42.9 mm 34.9 mm 34.9 mm 22.4 mm 0.6 mm 3.8 mm
100PHL-12 25.4 mm 4.2 mm 19.1 mm 42.9 mm 34.9 mm 34.9 mm 23.9 mm 0.6 mm 3.8 mm
150PH-2 38.1 mm 6.5 mm 15.7 mm 49.2 mm 34.9 mm 34.9 mm 28.4 mm 0.8 mm 4.6 mm
150PH-4 38.1 mm 6.5 mm 15.7 mm 49.2 mm 34.9 mm 34.9 mm 28.4 mm 0.8 mm 4.6 mm
150PH-6 38.1 mm 6.5 mm 15.7 mm 49.2 mm 34.9 mm 34.9 mm 28.4 mm 0.8 mm 4.6 mm
150PH-8 38.1 mm 6.5 mm 15.7 mm 49.2 mm 34.9 mm 34.9 mm 28.4 mm 0.8 mm 4.6 mm
150PH-10 38.1 mm 6.5 mm 15.7 mm 49.2 mm 34.9 mm 34.9 mm 28.4 mm 0.8 mm 4.6 mm
150PH-12 38.1 mm 6.5 mm 15.7 mm 49.2 mm 34.9 mm 34.9 mm 28.4 mm 0.8 mm 4.6 mm
150PH-14 38.1 mm 6.5 mm 15.7 mm 60.5 mm 49.2 mm 5.0 mm 28.4 mm 0.8 mm 4.6 mm
150PH-18 38.1 mm 6.5 mm 22.4 mm 49.2 mm 34.9 mm 34.9 mm 32.5 mm 0.8 mm 4.6 mm
150PH-24 38.1 mm 6.5 mm 22.4 mm 49.2 mm 34.9 mm 34.9 mm 32.5 mm 0.8 mm 4.6 mm
150PH-30 38.1 mm 6.5 mm 28.4 mm 49.2 mm 34.9 mm 34.9 mm 35.8 mm 0.8 mm 4.6 mm
200PH-10 15.0 mm 9.9 mm 25.4 mm 76.2 mm 63.5 mm 6.5 mm 39.6 mm 0.8 mm 5.6 mm
200PH-15 15.0 mm 9.9 mm 25.4 mm 76.2 mm 63.5 mm 6.5 mm 39.6 mm 0.8 mm 5.6 mm
200PH-20 15.0 mm 9.9 mm 25.4 mm 76.2 mm 63.5 mm 6.5 mm 39.6 mm 0.8 mm 5.6 mm
200PH-25 15.0 mm 9.9 mm 25.4 mm 76.2 mm 63.5 mm 6.5 mm 39.6 mm 0.8 mm 5.6 mm
200PH-35 15.0 mm 9.9 mm 25.4 mm 76.2 mm 63.5 mm 6.5 mm 39.6 mm 0.8 mm 5.6 mm
200PH-45 15.0 mm 9.9 mm 25.4 mm 76.2 mm 63.5 mm 6.5 mm 39.6 mm 0.8 mm 5.6 mm
200XPH-60 15.0 mm 9.9 mm 46.0 mm 76.2 mm 63.5 mm 6.5 mm 60.5 mm 0.8 mm 5.6 mm
200XPH-75 15.0 mm 9.9 mm 46.0 mm 76.2 mm 63.5 mm 6.5 mm 60.5 mm 0.8 mm 5.6 mm
200XPH-90 15.0 mm 9.9 mm 46.0 mm 76.2 mm 63.5 mm 6.5 mm 60.5 mm 0.8 mm 5.6 mm