LORD TUBEFORM Rubber Mounts H-series
Part # H-3004
LORD Center-Bonded Mounts isolate vibration, control shock and reduce noise due to structure-borne vibrations. Typical applications include engines, cabs, fuel tanks, pumps, air conditioning units, compressors, and industrial machinery.
Additional Images
REQUEST A QUOTE -
DeltaFlex is committed to providing you with the best customer experience possible.
Thank you for taking the time to learn about DeltaFlex and requesting a quote for our .
Our goal is to provide you with most efficient and effective customer support. The more information you can provide upfront, the more diligent we can be in getting a quote to you or assisting you with your request.
We know that your time is valuable. So, we have filled-in some of the information for you.
Thank you...for putting DeltaFlex to work for you.
Quick Quote
CUSTOMER SUPPORT QUESTION -
DeltaFlex is committed to providing you with the best customer support possible.
Thank you for taking the time to learn about DeltaFlex and our .
Our goal is to provide you with most efficient and effective customer service. The more information you can provide upfront, the more diligent we can be in assisting you with your request.
We know that your time is valuable, so we have already filled-in some of the information for you.
Thank you...for putting DeltaFlex to work for you.
Ask A Question
ENGINEERING ASSISTANCE -
DeltaFlex is committed to providing you with the best engineering support experience possible.
"Frequently vibration isolation problems require a system engineering analysis..." - Put us to work for you.
Thank you for taking the time to learn about DeltaFlex and our . Our applications engineer will help find the right solution for your application.
Our goal is to provide you with most efficient and effective engineering support. The more information you can provide upfront, the more diligent we can be in assisting you with your request.
We know that your time is valuable. So, we have filled-in some of the information for you.
Thank you...for putting DeltaFlex to work for you.
Engineering Support
| Max Axial Static Load Rating at Deflection | 140 lbs at 0.68 in / 616 N at 1.7 mm | ||||||||||||
| Figure | 1 | ||||||||||||
| Part No. | H-3004 | H3004 | ||||||||||||
| Manufacturer | LORD Corporation | ||||||||||||
| Part Category | Vibration Control | ||||||||||||
| Part Section | Center Bonded Mounts | ||||||||||||
| Part Type | Center Bonded Mount - Tubeform Mount H-Series | ||||||||||||
| Part Status |
|
||||||||||||
| Part Alternative |
|
||||||||||||
| Catalog Page No. |
|
| Dimensions | Technical Drawing | |||||||||||||||||||||
|
 |
|||||||||||||||||||||
|
NOTES: Red figures are metric reference. NOTE - * - For tightening torque information, refer to Tightening Torque Charts section. Materials: Outer and inner members, cold drawn low carbon seamless steel tubing, flexing element, specially compounded natural rubber. Not recommended for radial loading. Installation: Tubeform Mounts are installed by clamping the outer member into a socketin the supporting structure. A shoulder in the socket can position the mount. Flanged type mounts eliminate the need for a shoulder. The supported units are bolted to the inner member. Where necessary, functions of inner and outer members may be reversed. Metal washers may be installed at both ends of the inner member to provide interlocking of metal parts. |
***Notes only apply if called out in table*** NOTES
|
Features and Benefits
- Dynamically effective in all directions
- Prevent mechanical transmission noise
- Accomodares misalignment and distortion
- High rebound capacity
- Easy to install with common tools
- Standard bolt torque assures proper assembly
- Top and bottom parts are alike, cannot be misassembled
- Fail-safe assembly
- Sized for English and Metric bolts
- Long dependable service life
- Economical
NOTE - *
For tightening torque information, refer to Tightening Torque Charts section.
NOTES
- These ratings are for on-highway and general industrial use. For off-highway, use 80% of loads shown.
NOTES: Red figures are metric reference. -
NOTE - * - For tightening torque information, refer to Tightening Torque Charts section.
Mounts and washers only supplied by Lord
Materials: Outer and inner members, cold drawn low carbon seamless steel tubing, flexing element, specially compounded natural rubber.
Not recommended for radial loading.
Installation: Tubeform Mounts are installed by clamping the outer member into a socketin the supporting structure. A shoulder in the socket can position the mount. Flanged type mounts eliminate the need for a shoulder.
The supported units are bolted to the inner member. Where necessary, functions of inner and outer members may be reversed. Metal washers may be installed at both ends of the inner member to provide interlocking of metal parts.
Custom Designs
Customized designs and special elastomer compounds for specific problems are available. These may result in spring rates and dimensions other than shown.
A part’s listing on this website does not guarantee its availability.
Custom Parts
Our custom molding department can make a part just for your application.
Engineering
Would you like some assistance in selecting the right mount for your application? Our engineering department can help. Please call or use the webform below. We will be glad to assist.
Not what you are looking for?
Our knowledgeable staff can assist you with whatever you need. From Special Packaging, Overnight shipments to applications engineering. DeltaFlex is ready to help find a solution.
Engineering Assistance
"Frequently vibration isolation problems require a system engineering analysis..." - Put us to work for you.
DeltaFlex has the computer capability, as well as specialized programs, for analyzing engine/transmission combinations. The output from these analyses is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request. If you require this type of engineering assistance please call 800.657.0747 we will be glad to assist you.
What is the impact of Vibration Control?
The biggest impact that vibration isolation can have, is with the end users of our customers products, more importantly their perception of the quality of those products.
Values states herein represent typical values as not all test are run on each lot produced. For formalized product specifications or specific product end uses, contact Customer Service 262.632.2345.
A part’s listing on this website does not guarantee its availability.