Leveling Mount
Part # J-16462-7
LORD Leveling Mounts help level equipment.
Additional Images
REQUEST A QUOTE - Leveling Mount
DeltaFlex is committed to providing you with the best customer experience possible.
Thank you for taking the time to learn about DeltaFlex and requesting a quote for our Leveling Mount.
Our goal is to provide you with most efficient and effective customer support. The more information you can provide upfront, the more diligent we can be in getting a quote to you or assisting you with your request.
We know that your time is valuable. So, we have filled-in some of the information for you.
Thank you...for putting DeltaFlex to work for you.
Quick Quote
CUSTOMER SUPPORT QUESTION - Leveling Mount
DeltaFlex is committed to providing you with the best customer support possible.
Thank you for taking the time to learn about DeltaFlex and our Leveling Mount.
Our goal is to provide you with most efficient and effective customer service. The more information you can provide upfront, the more diligent we can be in assisting you with your request.
We know that your time is valuable, so we have already filled-in some of the information for you.
Thank you...for putting DeltaFlex to work for you.
Ask A Question
ENGINEERING ASSISTANCE - Leveling Mount
DeltaFlex is committed to providing you with the best engineering support experience possible.
"Frequently vibration isolation problems require a system engineering analysis..." - Put us to work for you.
Thank you for taking the time to learn about DeltaFlex and our Leveling Mount. Our applications engineer will help find the right solution for your application.
Our goal is to provide you with most efficient and effective engineering support. The more information you can provide upfront, the more diligent we can be in assisting you with your request.
We know that your time is valuable. So, we have filled-in some of the information for you.
Thank you...for putting DeltaFlex to work for you.
Engineering Support
| Max Axial Load |
4500 lbs. / 20017 N |
||||||||||||
| Adjusting Bolt | 3/4-10UNC x 5" / 127 mm | ||||||||||||
| Weight | 5.0 lbs. / 2.3 kg | ||||||||||||
| Elastomer | Neoprene Compounded to resist oil, ozone & caustic material | ||||||||||||
| Part No. | J-16462-4 | J164624 | ||||||||||||
| Manufacturer | LORD Corporation | ||||||||||||
| Part Category | Vibration Control | ||||||||||||
| Part Section | Machinery Mounts | ||||||||||||
| Part Type | Leveling Mounts | ||||||||||||
| Part Status |
|
||||||||||||
| Part Alternative |
|
||||||||||||
| Catalog Page No. |
|
| Dimensions - Under No Load | Technical Drawing | ||||||||||||
|
 |
||||||||||||
|
NOTES: Red figures are metric reference. SEE NOTES FOR INSTALLATION INSTRUCTIONS |
***Notes only apply if called out in table*** |
Vertical natural frequency under maximum load: 12 Hz.
Maximum adjustment is 1/2" (12.7 mm). Do not exceed this amount.
Metal housing made of high strength steel - high visibility yellow paint (OSHA approved).
Elastomer: neoprene compounded to resist oil, ozone and caustic material.
Installation
Before installing, be sure the mounts are the right ones for your machine.
- Remove adjusting bolt and lock nut from mount.
- Raise machine and slide mount under foot.
- Insert adjusting bolt through clearance hole in foot and engage threads in mount.
- Lower machine onto mounts
- Turn bolt until it bottoms.
- TO LEVEL - Level machine by turning the adjusting bolt.
- Tighten lock nut against machine base.
NUTS & BOLTS
Adjustment bolt and lock nut included.
Vibration Problems
LORD Machinery Mounts are specifically engineered to isolate vertical shocks and reduce transmission of structural noise through floors. If your application involves intermittent or continuous vibration frequencies above or below 600 cycles per minute, the follow applies -
- Vibration frequencies above 600 cycles per minute, use LORD Chan-L Mounts
- Vibration frequencies below 600 cycles per minute are involved, use LORD Lattice Mounts
Custom Designs
Customized designs and special elastomer compounds for specific problems are available. These may result in spring rates and dimensions other than shown.
A part’s listing on this website does not guarantee its availability.
Custom Parts
Our custom molding department can make a part just for your application.
Engineering
Would you like some assistance in selecting the right mount for your application? Our engineering department can help. Please call or use the webform below. We will be glad to assist.
Not what you are looking for?
Our knowledgeable staff can assist you with whatever you need. From Special Packaging, Overnight shipments to applications engineering. DeltaFlex is ready to help find a solution.
Engineering Assistance
"Frequently vibration isolation problems require a system engineering analysis..." - Put us to work for you.
DeltaFlex has the computer capability, as well as specialized programs, for analyzing engine/transmission combinations. The output from these analyses is a mounting proposal which optimizes performance over the complete range of operating speeds. This service is available to you upon request. If you require this type of engineering assistance please call 800.657.0747 we will be glad to assist you.
What is the impact of Vibration Control?
The biggest impact that vibration isolation can have, is with the end users of our customers products, more importantly their perception of the quality of those products.
Values states herein represent typical values as not all test are run on each lot produced. For formalized product specifications or specific product end uses, contact Customer Service 262.632.2345.
A part’s listing on this website does not guarantee its availability.